Roof replacement, storm damage repair, and flat roof systems that meet Florida's high-wind code, are fully permitted, and are coordinated by a Florida licensed general contractor. A licensed Florida roofing contractor partner performs the roofing, and you deal with one contact from estimate to final inspection.
Our Roofing Work
How it works
One licensed general contractor coordinates every step: a licensed roofing contractor installs the roof, while we manage permits, materials, inspections, and cleanup for you.
Call or fill out the form, and we'll go over the roof's age and material, signs of leaks or damage, how insurance fits in, and what other quotes you've received.
After an on-site roof inspection, you get a written quote in 48 hours: material, square footage, deck repair allowance, permit cost, and timeline, spelled out.
Once the permit is coordinated and materials arrive, a licensed roofing crew takes over: deck inspection, starter course, field nailing, flashing, ridge cap, and final cleanup.
County inspector signs off on the nailing pattern before it's covered. Your permit is on record, your insurance is protected, and you have a certificate of completion in hand.
What we do in Broward County
Services include asphalt shingles, metal roofing, flat TPO/EPDM systems, and storm damage repair. The work follows the Florida Building Code, is permitted, and is managed by one contractor.
Full tear-off and replacement with high-wind rated materials approved for Florida. The permit, inspection, and dumpster are on us, and your written scope names the exact shingle, metal, or tile product.
We repair storm damage, including blown-off sections, trace leaks to their source, replace flashing, and fix ridge caps. We document the damage for insurance and can work from your adjuster's scope, without inflated supplements for work we don't perform.
For flat additions, garage roofs, covered patios, and flat sections on residential properties we install TPO, EPDM, and modified bitumen with proper drainage slope, backed by manufacturer and labor warranties.
Honest pricing
Roofing prices around South Florida depend on material, pitch, square footage, deck condition, and permit fees. The figures below reflect actual projects, and we'll show you where your own roof lands before you commit.
A partial replacement, storm repair, or section re-roof, ideal when most of the roof still has years to go and replacing all of it isn't necessary.
Everything in a standard re-roof: tear-off, deck inspection and repair, underlayment, Florida high-wind rated shingles or metal, new flashing, ridge cap, and the permit. Broward County's most common scope.
Standing seam metal roofing, concrete tile, or large residential footprints over 3,500 sq ft. Includes all premium underlayments, hurricane straps where required, and extended manufacturer warranties.
Broward County · What homeowners need to know
Florida's roofing code is among the toughest in the nation, shaped by hurricanes Andrew, Irma, Ian, and Milton. A roof that passes in Georgia may not pass inspection in Broward County.
Broward County sits in a high-wind zone. Roofing requires materials rated for minimum 150 mph wind speed, specific nail patterns (4 nails per shingle minimum for 3-tab; 6 nails for architectural shingles in high-wind exposures), and a sealed roof deck. These aren't options — they're code requirements. Work that doesn't meet them fails inspection.
A roofing permit is required for any re-roofing in Broward County — not optional. An inspector must view the nailing pattern before it's covered. Without a permit, you cannot sell your home without disclosing the unpermitted work, and your homeowner's insurance may not pay a claim. We pull and close the permit on every project.
We photograph and document storm damage before and during demolition and can work with your insurance adjuster's scope. We don't pad the supplement with items the adjuster never approved, and we don't begin a claim job until the scope is in writing — that avoids the horror stories common after major storms in South Florida.
South Florida's humidity accelerates wood deck rot, especially around penetrations and at eaves. We inspect the deck before the quote and include a realistic allowance for deck board replacement. Low estimates that don't include any deck repair allowance are just moving the surprise to invoice day. We tell you what to expect before you sign.
Florida code calls for a sealed roof deck: either peel-and-stick self-adhered underlayment, or a combination with mechanically fastened synthetic underlayment, forming a secondary water barrier. It is not the thin felt paper used in much of the country, and its cost is in our quote because it's required, not an upsell.
Our license is Florida general contractor CGC1531095. Roofing in Florida is performed by licensed roofing contractors, so a licensed, insured partner does the work while we stay your one contact from estimate to final inspection, across Fort Lauderdale and all of Broward County. License lookups are at myfloridalicense.com.
The permit and code expertise we developed in South Florida now serves Fort Lauderdale. These are the factors that shape every project in this market.
Broward County homeowners are increasingly facing insurance non-renewals for older roofs — Citizens Property Insurance and most private carriers now require inspections for roofs older than 15 years and may decline to renew if significant wear is found. A new roof, properly permitted with a Florida Certification Form completed at close-out, is often the document an insurer needs to reinstate or lower your premium.
We built our permit and inspection process in Palm Beach County and apply the same standard in Broward — including on the many condo and townhome roofs common here, where association approval and shared-wall coordination add another layer most contractors don't plan for. We've seen the aftermath of unpermitted roofing work come up on title searches when homeowners try to sell, and the cost to retroactively permit or redo the work is always higher than doing it right the first time.
Florida-wide information on roof costs, building code, and the rules that apply to every replacement.
From Deerfield Beach to Miramar — Broward County is our newest market, backed by 10+ years of licensed GC experience in South Florida.
Common questions
Questions tend to focus on permits, insurance, material options, and what code actually demands versus what some roofers claim.
A full roof replacement in Broward County ranges from $15,000 for a smaller home with architectural shingles to $65,000+ for a large home with standing seam metal or concrete tile. The biggest variables are roof size (square footage), pitch, material selection, and deck condition. We inspect the roof before quoting and include a realistic deck repair allowance — not zero — in the written scope.
Yes, no exceptions. Broward County and the City of Fort Lauderdale require a permit for re-roofing and an inspection of the nailing pattern before the roof is completed. Unpermitted work can cost you an insurance claim and must be disclosed at sale, so we pull and close every permit.
Architectural asphalt shingles offer the best value — Florida high-wind rated, 25–30 year lifespan, and widely accepted by insurers. Standing seam metal is the most durable option (40–50 years), provides the best insurance premium discounts, and handles South Florida weather best. Concrete tile is popular in Weston and Coral Springs communities and fits HOA requirements. We help you choose based on budget, HOA requirements, and insurance situation — not commission.
We photograph the damage before demo, write a scope that tracks the claim line by line, and will meet your adjuster on site. There are no inflated supplements for unapproved work, and no insurance work starts without written authorization. If the scope needs revising, we make our case with documentation rather than pressure tactics.
A full shingle replacement on a typical Broward County home (2,000–3,000 sq ft) typically takes 1–3 days for the physical work. Add 1–2 weeks for permit processing before we can start, and 3–5 days for the final inspection after completion. We provide a full project timeline in writing so you know exactly what to expect — including the inspection window.
Likely, particularly for metal. Citizens Property Insurance and most private carriers reward high wind-resistance ratings with discounts, and we give you a Florida Certification Form at close-out documenting the system, wind rating, and installation. Some customers have saved meaningfully on premiums after a metal roof.
D&Co is a Florida Certified General Contractor (CGC1531095). Under Florida law, roofing is performed by a licensed roofing contractor, so we coordinate your roofing project through a licensed, insured Florida roofing contractor partner who performs the roofing work and holds the roofing license. D&Co stays your single point of contact from estimate through final inspection. You can verify any contractor's license at the Florida DBPR website (myfloridalicense.com) before you sign.
Ready to start?
Describe your roof and we'll contact you within 1 business day with a written scope that is Florida code compliant. No obligation.
Prefer email? office@dandcohomes.com
More from D&Co — Broward County