New roofs, storm repairs, and flat roof systems built to Florida high-wind code and permitted properly. A Florida licensed general contractor runs the project while a licensed Florida roofing contractor partner does the roofing — one point of contact from the estimate through the final inspection.
Our Roofing Work
How it works
One licensed GC coordinates everything — a licensed roofing contractor performs the roofing work, and we manage the permit process, material delivery, inspection, and cleanup through one point of contact.
Submit the form or give us a call. We'll ask about the roof's age and material, any leaks or damage, your insurance situation, and whether you've collected other quotes.
The roof is inspected on site. Written quote within 48 hours — material type, square footage, deck repair allowance, permit cost, and timeline. No vague estimates.
Permit coordinated, materials delivered, licensed roofing crew on-site. The licensed roofing contractor handles the job — decking inspection, starter course, field nailing pattern, flashing, ridge cap, and final cleanup.
The inspector approves the nailing pattern before it is covered. The permit goes on record, your insurance stays protected, and you receive a certificate of completion.
What we do in Lee County
Shingle, metal, and flat TPO/EPDM roofing plus storm damage repair, all built to the Florida Building Code, permitted, and handled by a single contractor.
Complete tear-off and replacement with Florida high-wind rated materials. We handle the permit, the inspection, and the dumpster. Asphalt shingles, metal panels, or tile — specified by product name in your written scope.
Partial repairs after storm events, blown-off sections, leak investigation and source repair, flashing replacement, and ridge cap repairs. We document the damage for insurance claims and can work with your adjuster's scope. No inflated supplements for work we don't do.
Flat and low-slope roofs get TPO, EPDM, or modified bitumen systems with drainage slope engineered in. That covers additions, garage roofs, patios, and flat residential sections, all with manufacturer and labor warranties.
Honest pricing
Material (shingle, metal, or tile), pitch, size, deck condition, and permit fees set roofing prices in Southwest Florida. The ranges here are based on real jobs, and you'll know exactly where yours falls before signing.
Partial replacement, storm damage repair, or re-roofing a section. Ideal when the rest of the roof has years of life remaining and a full replacement isn't warranted.
Complete tear-off, deck inspection and repair, fresh underlayment, high-wind rated shingles or metal panels, flashing, ridge cap, and permit. It is the scope we see most in Lee County.
Standing seam metal, concrete tile, or residences larger than 3,500 sq ft, with premium underlayments, hurricane straps where required, and extended manufacturer warranties included.
Lee County · What homeowners need to know
Roofing code in Florida is some of the strictest anywhere, a response to hurricanes Andrew, Irma, Ian, and Milton. What clears inspection in Georgia will not necessarily clear it in Lee County.
Lee County sits in a high-wind zone, and coastal areas near Fort Myers Beach and Sanibel are among the highest-exposure zones in the state. Roofing requires materials rated for minimum 150 mph wind speed, specific nail patterns (4 nails per shingle minimum for 3-tab; 6 nails for architectural shingles in high-wind exposures), and a sealed roof deck. These aren't options — they're code requirements. Work that doesn't meet them fails inspection.
A roofing permit is required for any re-roofing in Lee County — not optional. An inspector must view the nailing pattern before it's covered. Without a permit, you cannot sell your home without disclosing the unpermitted work, and your homeowner's insurance may not pay a claim. We pull and close the permit on every project.
Storm damage gets thorough documentation, with photographs before and during demolition, and we work alongside your adjuster's scope. We won't inflate the supplement and won't start a claim job without a written scope — the best protection against the nightmare stories after major storms in Southwest Florida.
Southwest Florida's humidity and salt air near the coast accelerate wood deck rot, especially around penetrations and at eaves. We inspect the deck before the quote and include a realistic allowance for deck board replacement. Low estimates that don't include any deck repair allowance are just moving the surprise to invoice day. We tell you what to expect before you sign.
A sealed deck is required under Florida code, using self-adhered peel-and-stick underlayment or a combination with mechanically fastened synthetic underlayment to create a secondary water barrier. This isn't ordinary felt paper, and we include the cost in the quote since the code demands it.
D&Co is a Florida licensed general contractor (CGC1531095). Because Florida roofing must be performed by a licensed roofing contractor, we coordinate your project with a licensed, insured roofing partner and remain your single point of contact from estimate to final inspection. We are active across Fort Myers and all of Lee County, and you can verify any contractor's license at myfloridalicense.com before signing.
We bring the same permit and code expertise we built in South Florida to Lee County. Here is what shapes every project in this county.
Lee County homeowners are increasingly facing insurance non-renewals for older roofs — Citizens Property Insurance and most private carriers now require inspections for roofs older than 15 years and may decline to renew if significant wear is found. A new roof, properly permitted with a Florida Certification Form completed at close-out, is often the document an insurer needs to reinstate or lower your premium.
We built our permit and inspection process in South Florida and apply the same standard in Lee County — including on the many condo and investment properties common here near Fort Myers Beach and Bonita Springs, where association approval and rental-schedule coordination add another layer most contractors don't plan for. We've seen the aftermath of unpermitted roofing work come up on title searches when homeowners try to sell, and the cost to retroactively permit or redo the work is always higher than doing it right the first time.
Guides covering statewide roofing costs, code, and Florida rules that touch every roof replacement.
From Fort Myers to Bonita Springs — Lee County is our Southwest Florida market, backed by 10+ years of licensed GC experience in Florida.
Common questions
Especially about permits, insurance, material choices, and what Florida code actually requires — versus what some contractors claim it requires.
A full roof replacement in Lee County ranges from $15,000 for a smaller home with architectural shingles to $65,000+ for a large home with standing seam metal or concrete tile. The biggest variables are roof size (square footage), pitch, material selection, and deck condition. We inspect the roof before quoting and include a realistic deck repair allowance — not zero — in the written scope.
Always. A building permit is required for re-roofing in Lee County or the City of Fort Myers, with an inspector viewing the nailing pattern before completion. Skipping it can mean a denied insurance claim and a disclosure duty when you sell. Permits are included in our standard scope.
Architectural asphalt shingles offer the best value — Florida high-wind rated, 25–30 year lifespan, and widely accepted by insurers. Standing seam metal is the most durable option (40–50 years), provides the best insurance premium discounts, and handles Southwest Florida's storm exposure best — especially near the coast. Concrete tile is popular in Estero and newer Fort Myers communities and fits HOA requirements. We help you choose based on budget, HOA requirements, and insurance situation — not commission.
Photos of the damage come first, before any demolition. We then write a scope that matches the claim line by line and can meet your adjuster on site. We don't submit inflated supplements for work outside the approved scope or start insurance work without written authorization, and if the adjuster's scope needs revising, we negotiate with documentation, not pressure.
The physical work on a typical Lee County home (2,000–3,000 sq ft) takes 1–3 days for a full shingle replacement. Allow 1–2 weeks for permit processing before work begins and 3–5 days for the final inspection afterward. A full timeline, inspection window included, is given in writing.
Often, and most of all with metal roofs. Citizens and most private insurers discount roofs with strong wind-resistance ratings. We complete a Florida Certification Form at close-out describing the roof system, wind rating, and installation method — the form insurers use to apply discounts. Several clients have seen meaningful premium reductions after installing metal.
D&Co's license is Florida Certified General Contractor CGC1531095. Since roofing is performed by a licensed roofing contractor, we coordinate your job through a licensed, insured partner who holds the roofing license; we stay your single contact from estimate to final inspection. Licenses can be checked on the Florida DBPR site, myfloridalicense.com.
Ready to start?
Tell us about your roof, and we'll respond within 1 business day with a code-compliant written scope and no obligation.
Prefer email? office@dandcohomes.com
More from D&Co — Lee County