Full replacements, storm damage repairs, and flat roofs, all compliant with Florida's high-wind code and permitted. We coordinate as your Florida licensed general contractor, a licensed roofing contractor partner performs the roofing, and you speak with one person from estimate to final inspection.
Our Roofing Work
How it works
A single licensed GC runs the whole project. A licensed roofing contractor does the roofing; we handle permitting, material delivery, inspection, and cleanup, so you only have one person to call.
Call or fill out the form, and we'll go over the roof's age and material, signs of leaks or damage, how insurance fits in, and what other quotes you've received.
The roof is inspected on site. Written quote within 48 hours — material type, square footage, deck repair allowance, permit cost, and timeline. No vague estimates.
The permit is arranged, materials are delivered, and a licensed roofing crew starts work. The roofing contractor covers the deck inspection, starter course, nailing pattern, flashing, ridge cap, and the cleanup at the end.
The inspector approves the nailing pattern before it is covered. The permit goes on record, your insurance stays protected, and you receive a certificate of completion.
What we do in Tampa
Shingle, metal, and flat TPO/EPDM roofing plus storm damage repair, all built to the Florida Building Code, permitted, and handled by a single contractor.
Full tear-off and replacement with high-wind rated materials approved for Florida. The permit, inspection, and dumpster are on us, and your written scope names the exact shingle, metal, or tile product.
After a storm we handle partial repairs, leak investigation, flashing, and ridge caps. Damage is documented for insurance, we can work with your adjuster's scope, and we never inflate a supplement.
TPO, EPDM, and modified bitumen for low-slope applications — flat additions, garage roofs, covered patios, and commercial-grade flat sections on residential properties. Proper drainage slope engineered in. All work backed by manufacturer and labor warranties.
Honest pricing
Roofing prices in Central Florida are driven by material cost (shingle vs. metal vs. tile), roof pitch, square footage, deck condition, and permit fees. These ranges reflect real projects. We'll tell you exactly where your roof lands before you sign.
A partial replacement, storm repair, or section re-roof, ideal when most of the roof still has years to go and replacing all of it isn't necessary.
Everything in a standard re-roof: tear-off, deck inspection and repair, underlayment, Florida high-wind rated shingles or metal, new flashing, ridge cap, and the permit. Hillsborough County's most common scope.
This tier covers metal or concrete tile roofs and homes over 3,500 sq ft, including premium underlayment, hurricane straps if required, and extended manufacturer warranties.
Tampa / Hillsborough County · What homeowners need to know
Florida's roofing code is among the toughest in the nation, shaped by hurricanes Andrew, Irma, Ian, and Milton. A roof that passes in Georgia may not pass inspection in Hillsborough County.
Code in Hillsborough County calls for wind-rated materials, specific nail counts (4 per 3-tab shingle at minimum; 6 per architectural shingle where wind exposure is high), and a sealed deck. None of this is optional, and work that falls short fails inspection.
A permit is mandatory for re-roofing in Hillsborough County and the City of Tampa. Inspectors must view the nailing pattern before it's covered, and unpermitted work has to be disclosed at sale and can jeopardize an insurance claim. We pull and close the permit on every job with the office that has jurisdiction over your address.
We document storm damage clearly, photograph the affected areas before and during demo, and can work alongside your insurance adjuster's scope. We don't inflate the supplement with line items the adjuster never approved, and we don't start work on a claim until the scope is in writing. That's how you avoid the nightmare stories — especially common after major storms in the Tampa Bay area.
Tampa's humidity and afternoon storm cycles accelerate wood deck rot, especially around penetrations and at eaves. We inspect the deck before the quote and include a realistic allowance for deck board replacement. Low estimates that don't include any deck repair allowance are just moving the surprise to invoice day. We tell you what to expect before you sign.
Florida code requires a sealed roof deck system — either peel-and-stick self-adhered underlayment or a combination with mechanically fastened synthetic underlayment — that provides a secondary water barrier. This is not the cheap felt paper used in most of the country. Material and labor cost is built into our quote because it's code, not an upsell.
D&Co is a Florida licensed general contractor (CGC1531095). Because Florida roofing must be performed by a licensed roofing contractor, we coordinate your project with a licensed, insured roofing partner and remain your single point of contact from estimate to final inspection. We are active across Tampa and all of Hillsborough County, and you can verify any contractor's license at myfloridalicense.com before signing.
Our South Florida permit and code experience carries over to Tampa, and these are the points that shape every job here.
Tampa Bay homeowners are increasingly facing insurance non-renewals for older roofs — Citizens Property Insurance and most private carriers now require inspections for roofs older than 15 years and may decline to renew if significant wear is found. A new roof, properly permitted with a Florida Certification Form completed at close-out, is often the document an insurer needs to reinstate or lower your premium.
We built our permit and inspection process in South Florida and apply the same standard in Tampa — including confirming whether a project falls under Hillsborough County or City of Tampa jurisdiction, and coordinating historic-district or HOA architectural approval where it applies. We've seen the aftermath of unpermitted roofing work come up on title searches when homeowners try to sell, and the cost to retroactively permit or redo the work is always higher than doing it right the first time.
Statewide guidance on roofing cost, code, and Florida-specific rules that affect every roof replacement.
From South Tampa to Brandon — Tampa and Hillsborough County is our Tampa Bay market, backed by 10+ years of licensed GC experience in Florida.
Common questions
Mostly about permits, insurance, choosing materials, and what Florida code really requires compared with what some contractors say it requires.
Expect $15,000 for a smaller architectural-shingle home up to $65,000+ for a large home with metal or concrete tile in Tampa and Hillsborough County. Square footage, pitch, material, and the condition of the deck decide where you land; we inspect first and put a realistic deck allowance in writing.
Yes, every time. Re-roofing in Hillsborough County or the City of Tampa requires a building permit, and an inspector must view the nailing pattern before the roof is finished. Without one, your insurer may not cover a claim and you must disclose the unpermitted work at sale. We pull and close each permit as part of the standard scope.
Architectural asphalt shingles offer the best value — Florida high-wind rated, 25–30 year lifespan, and widely accepted by insurers. Standing seam metal is the most durable option (40–50 years) and provides the best insurance premium discounts. Concrete tile is popular in newer Riverview and New Tampa communities and fits HOA requirements. We help you choose based on budget, HOA requirements, and insurance situation — not commission.
Our process: photos before demolition, a written scope matched to the claim line by line, and a meeting with your adjuster on site if needed. We don't submit supplements for work outside the approved scope, we require written authorization before starting, and we negotiate with documentation.
On an average Hillsborough County home of 2,000–3,000 sq ft, a complete shingle replacement takes 1–3 days on the roof. Permit processing adds 1–2 weeks before we start and the final inspection takes 3–5 days after. You get the whole timeline in writing, inspection window included.
Probably, especially with metal. Citizens Property Insurance and most private carriers give significant discounts for roofs with high wind-resistance ratings. At close-out we provide a Florida Certification Form documenting the roof system, wind rating, and installation method, which your insurer needs to apply a discount. Some clients have seen meaningful premium reductions after a new metal roof.
D&Co's license is Florida Certified General Contractor CGC1531095. Since roofing is performed by a licensed roofing contractor, we coordinate your job through a licensed, insured partner who holds the roofing license; we stay your single contact from estimate to final inspection. Licenses can be checked on the Florida DBPR site, myfloridalicense.com.
Ready to start?
Tell us about your roof, and we'll respond within 1 business day with a code-compliant written scope and no obligation.
Prefer email? office@dandcohomes.com
More from D&Co — Tampa