Cape Coral, FL · Lee County
Leak repair, storm damage, and full roof replacement in Cape Coral — managed by a Florida licensed general contractor and performed by a licensed Florida roofing contractor partner. Written quote before work starts.
Free Estimates · Same-Day Callback
Just your name and number — we'll call you back, usually the same day.
No spam. We respond fast.
Roofing Cost in Cape Coral
Whether you're searching "roof repair near me," "roof replacement quote," or "roofers near me," you want a real number from a contractor who will be there when the job is done. D&Co Homes is a Florida licensed general contractor that manages your roofing project from first call to final inspection, with the roofing itself performed by a licensed, insured Florida roofing contractor partner.
| Job | Typical Cost |
|---|---|
| Minor leak or shingle repair | $350 – $1,500 |
| Tile roof repair (slipped or broken tiles, underlayment spot repair) | $500 – $2,500 |
| Flat roof (TPO / modified bitumen) repair | $500 – $2,000 |
| Emergency tarping after storm damage | $300 – $900 |
| Asphalt shingle roof replacement (typical home) | $8,000 – $18,000 |
| Tile roof replacement | $18,000 – $45,000 |
| Standing seam metal roof | $20,000 – $55,000+ |
These are typical Florida planning ranges. Your price depends on roof size, pitch, deck condition, and materials, and you receive a written quote before any work starts. See our roof replacement cost guide for a deeper breakdown.
Leaks & Repairs
Most roof leak calls in Lee County trace back to a short list of causes: cracked or slipped tiles, lifted or missing shingles after wind, failed flashing around vents, chimneys and skylights, worn sealant, and ponding water on flat roofs. A stain on the ceiling is rarely directly under the leak, so a proper repair starts with finding where the water actually enters, not just patching the stain.
A small repair done early is a fraction of the cost of replacing saturated decking and insulation later. If you have a recurring leak, a sagging section, or interior water damage, ask for a written assessment so you can compare repair against replacement with real numbers.
Emergency & Storm Damage
When a storm or fallen branch opens up your roof, the first goal is keeping water out. Call or submit the form and we call back the same day to understand the damage and coordinate a licensed roofing contractor for an inspection, temporary tarping if needed, and the permanent repair. Response time depends on storm conditions and crew availability, and we'll tell you plainly what to expect.
While you wait, photograph the damage from the ground and inside, move belongings away from active leaks, and keep receipts for any temporary repairs. Those records matter if you file an insurance claim.
Roof Types
Asphalt shingle: the most common and most affordable option. Architectural shingles carry a better wind rating than basic three-tab shingles for a modest price premium.
Tile (concrete or clay barrel): long-lived and common across South and Southwest Florida. The tiles often outlast the underlayment beneath them, which is why many tile roofs are re-underlaid rather than fully replaced.
Standing seam metal: the highest upfront cost, with a long service life, strong wind performance, and possible insurance credits when installed to code.
Flat and low-slope (TPO, modified bitumen): common on additions, porches, and commercial buildings, where drainage and seam quality decide how long the roof lasts.
Not sure which fits your home? Our tile vs. shingle guide walks through the tradeoffs, and the Florida 25% roof rule guide explains when partial repairs can trigger a full upgrade.
Who Does the Work
D&Co Homes is a Florida licensed general contractor (CGC1531095). Under Florida law, roofing is performed by a licensed roofing contractor, so we coordinate your project with a licensed, insured Florida roofing contractor partner. They perform the roofing work and hold the roofing license; D&Co manages the project and stays your single point of contact from estimate through final inspection.
You should always verify the license of anyone working on your roof. You can look up any Florida contractor at myfloridalicense.com before you sign.
Commercial & Property Management
For offices, retail, multi-unit buildings and HOA-managed properties, we coordinate flat roof repair, re-coating, and replacement. Property managers get one point of contact for assessments and repairs across a portfolio instead of chasing a different roofer for every building.
Common Questions
Typical Florida ranges: asphalt shingle replacement runs roughly $8,000–$18,000 for an average home, tile roof replacement $18,000–$45,000, and standing seam metal $20,000–$55,000 or more. Minor leak and shingle repairs typically run $350–$1,500. Final pricing depends on roof size, pitch, deck condition and materials, and you receive a written quote before work starts.
Yes. Call or submit the form and we call back the same day to understand the damage and coordinate a licensed roofing contractor for an inspection, temporary tarping if needed, and the permanent repair. Response time depends on storm conditions and crew availability.
A localized leak, a few missing shingles or slipped tiles is usually a repair. Widespread granule loss, repeated leaks, sagging decking, or a roof near the end of its service life usually points to replacement. In Florida, the so-called 25 percent rule and insurer roof-age requirements can also change the answer on older roofs, so get a written assessment before deciding.
D&Co is a Florida Certified General Contractor (CGC1531095). Under Florida law, roofing is performed by a licensed roofing contractor, so we coordinate your roofing project through a licensed, insured Florida roofing contractor partner who performs the roofing work and holds the roofing license. D&Co stays your single point of contact from estimate through final inspection. You can verify any contractor's license at myfloridalicense.com before you sign.
Asphalt shingle, concrete and clay barrel tile, standing seam and other metal roofing, and flat or low-slope systems such as TPO and modified bitumen, for both residential and commercial properties.
Most shingle replacements take one to three days of roofing work, while tile and metal roofs commonly take three to seven days or more. Permit approval, material lead times and weather add to the overall timeline.
Florida Licensed General Contractor · CGC1531095
Tell us about the roof and we'll send a written quote — no pressure, no obligation.
Most requests get a same-day callback. Free, no-obligation quote.